Part Number Hot Search : 
FOD3150S 5945B SMAU1G BZT52C BF494 TDA7433 TCET1202 MFWATS
Product Description
Full Text Search
 

To Download G1212 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Global Mixed-mode Technology Inc.
G1212
Rail-to-Rail I/O OP Amp
Features
Single-Supply Operation: 2.0V to 5.5V Low Supply Current: 700 A Wide Bandwidth: 3 MHz Slew Rate: 1 V/s No Phase Reversal Unity Gain Stable Small, 5-Pin SOT23-5 Package available
General Description
The G1212 is a rail-to-rail input and output single-supply amplifiers. This high output current makes these amplifiers excellent for driving either resistive or capacitive loads. AC performance is very good with 3.0MHz bandwidth. The very low input bias currents enable the G1212 to be used for integrators and diode amplification and other applications requiring low input bias current. The supply current is only 700A per amplifier at 3.0V, allowing low current applications to control high current loads. Applications include audio amplification for computers, sound ports, sound cards and set-top boxes. The G1212 is very stable and capable of driving capacitive loads. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS ADC/DACs, ASICs or other wide output swing devices in single-supply systems.
Applications
Battery-Powered Instruments Portable Equipment Audio Signal Conditioning Multimedia Audio ASIC Input or Output Amplifier
Ordering Information
PART
G1212
TEMP. RANGE
0C to 70C
PIN-PACKAGE
SOT23-5
Pin Configuration
Typical Application Circuit
G1212
OUT VDD 1 5 VSS IN 2
+ -
VDD 2 + G1212 G121 1 RL 2K OUT
3 4
-
5 4 IN-
IN+
3 SOT23-5
Ver 1.0 Jul 30, 2001
TEL: 886-3-5788833 http://www.gmt.com.tw
1
Global Mixed-mode Technology Inc.
Absolute Maximum Ratings (Note1)
SYMBOL
VDD Tstg Tamb
G1212
MIN.
0 -65 0
PARAMETER
Supply voltage Storage temperature Operating ambient temperature
CONDITIONS
MAX.
7.0 +150 +70
UNIT
V C C
Notes: 1. Absolute Maximum Ratings are limits beyond which damage to the device may occur.
Thermal Characteristics
SYMBOL
Rth j-a
PARAMETER
Thermal resistance from junction to ambient in free air SOT23-5
VALUE
240
UNIT
C/W
Electrical Characteristics
VDD = 2V; VSS = 0V ; Tamb = 25C; RL >1M; unless otherwise specified. SYMBOL
Supplies IDD Ptot
PARAMETER
Supply current Total power dissipation no load no load
CONDITIONS
MIN.
-
TYP.
0.13 0.26 1mV
MAX.
0.4 0.8 15 2.0
UNIT
mA mW mV V nA nA M dB mA V dB dB MHz V/s
DC Characteristics VI (OS) Input offset voltage VCM IB IOS RIN AV IO VO PSRR CMRR Common mode voltage Input Bias Current Input Bias Current Offset Input Resistance Open Loop Gain Maximum output current Output Voltage Swing Power supply rejection ratio Common-Mode Rejection Ratio 0
0.05 0.05 1000 95 12 50 55 1.0 0.3
VOUT = VIN x 90% RL = 2k
0.04
1.96 -
AC Characteristics GBWP Gain-Bandwidth Product SR PM Slew-Rate Phase Margin
Open-loop; No Load Measured from 20% to 80% of 2VP-P step
-
-
-
60
-
deg
Ver 1.0 Jul 30, 2001
TEL: 886-3-5788833 http://www.gmt.com.tw
2
Global Mixed-mode Technology Inc.
Electrical Characteristics
VDD = 3V; VSS = 0V ; Tamb = 25C; RL =1M; unless otherwise specified. SYMBOL
Supplies IDD Ptot
G1212
MIN.
-
PARAMETER
Supply current Total power dissipation no load no load
CONDITIONS
TYP.
0.7 2.1 1.5
MAX.
2.1 6.3 15 3.0
UNIT
mA mW mV V nA nA M dB mA V dB dB MHz V/s
DC Characteristics VI (OS) Input offset voltage VCM IB IOS RIN AV IO VO PSRR CMRR Common mode voltage Input Bias Current Input Bias Current Offset Input Resistance Open Loop Gain Maximum output current Output Voltage Swing Power supply rejection ratio Common-Mode Rejection Ratio 0
0.05 0.05 1000 90 27 65 55 3.0 1
VOUT = VIN x 90% RL = 2k
0.04
2.96 -
AC Characteristics GBWP Gain-Bandwidth Product SR PM Slew-Rate Phase Margin
Open-loop; No Load Measured from 20% to 80% of 5VP-P step
-
-
-
60
-
deg
Electrical Characteristics
VDD = 5V; VSS = 0V ; Tamb = 25C; RL = 1M; unless otherwise specified. SYMBOL
Supplies IDD Ptot
PARAMETER
Supply current Total power dissipation no load no load
CONDITIONS
MIN.
-
TYP.
0.9 4.5 3
MAX.
2.4 12 15 5.0
UNIT
mA mW mV V nA nA M dB mA V dB dB MHz V/s
DC Characteristics VI (OS) Input offset voltage VCM IB IOS RIN AV IO VO PSRR CMRR Common mode voltage Input Bias Current Input Bias Current Offset Input Resistance Open Loop Gain Maximum output current Output Voltage Swing Power supply rejection ratio Common-Mode Rejection Ratio 0
0.05 0.05 1000 65 60 65 45 13 6
VOUT = VIN x 90% RL = 2k
0.05
4.95 -
AC Characteristics GBWP Gain-Bandwidth Product SR PM Slew-Rate Phase Margin
Open-loop; No Load Measured from 10% to 90% of 5VP-P step
-
-
-
60
-
deg
Ver 1.0 Jul 30, 2001
TEL: 886-3-5788833 http://www.gmt.com.tw
3
Global Mixed-mode Technology Inc.
Large Signal Transient Response Figure
Test ConditionTA = 25C, AV = 1 , RL = 2K
G1212
Vs = 1V
Vs = 2.5V
Vs = 1.5V
operation with beyond-the Rail input
Ver 1.0 Jul 30, 2001
TEL: 886-3-5788833 http://www.gmt.com.tw
4
Global Mixed-mode Technology Inc.
Small Signal Transient Response Figure
Test ConditionTA = 25C, AV = 1 , RL = 2k
G1212
Vs = 1V
Vs = 1.5V
Vs = 2.5V
Test Condition: Vs =1.5V,TA = 25C
Open-Loop Gain & Phase vs. Frequency
100 90 80 70 60 50 40 30 20 10 0 0.1 1 10 100 -50 Vs=1.5V -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 1000 10000
Test Condition: Vs =1.5V,TA = 25C
PSRR
Power Supply Rejection - dB
70 60 50 40 30 20 10 0 0.1 1 10 100 1000
PSRR + PSRR -
Vs=1.5V
Phase - degree
Gain - dB
Frequency - kHZ
Frequency - kHZ
Ver 1.0 Jul 30, 2001
TEL: 886-3-5788833 http://www.gmt.com.tw
5
Global Mixed-mode Technology Inc.
Package Information
G1212
C L
D
E
H
e1 e
1
A A2 A1
b
Note: 1. Package body sizes exclude mold flash protrusions or gate burrs 2. Tolerance 0.1000 mm (4mil) unless otherwise specified 3. Coplanarity: 0.1000mm 4. Dimension L is measured in gage plane SYMBOLS
A A1 A2 b C D E e e1 H L 1
MIN
1.00 0.00 0.70 0.35 0.10 2.70 1.40 --------2.60 0.37 1
DIMENSIONS IN MILLIMETERS NOM
1.10 ----0.80 0.40 0.15 2.90 1.60 1.90(TYP) 0.95 2.80 -----5
MAX
1.30 0.10 0.90 0.50 0.25 3.10 1.80 --------3.00 ----9
Taping Specification (Unit: mm)
Feed Direction SOT 23-5 Package Orientation
GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications.
Ver 1.0 Jul 30, 2001
TEL: 886-3-5788833 http://www.gmt.com.tw
6


▲Up To Search▲   

 
Price & Availability of G1212

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X